Anita Gehlot

The book Anatomy of IoT Botnets and Detection Methods delves into the evolving landscape of cybersecurity threats associated with the Internet of Things (IoT), specifically focusing on the anatomy, behavior, and detection of IoT-based botnets. As IoT devices proliferate in both consumer and industrial settings, their inherent vulnerabilities—such as weak authentication, limited processing power, and lack of regular updates—make them prime targets for attackers. The book begins by exploring how IoT botnets are formed, highlighting key attack vectors such as malware propagation, command, and control (C&C) mechanisms, and commonly exploited protocols like Telnet and UPnP. Notable case studies, including the Mirai and Mozi botnets, illustrate real-world impacts, emphasizing the scale and damage these threats can inflict. The core of the book then transitions into detection methodologies, covering both traditional and AI-driven approaches. Techniques such as signature-based detection, anomaly detection using machine learning, network traffic analysis, and honeypot deployment are thoroughly examined. The authors also address the challenges in detecting IoT botnets, including encrypted traffic, device heterogeneity, and low visibility in resource-constrained devices. Furthermore, the book emphasizes the importance of proactive defense strategies, such as firmware hardening, secure boot mechanisms, and real-time behavioral analytics. It underscores the role of collaborative intelligence sharing among stakeholders to enhance detection capabilities. By integrating theoretical concepts with practical insights and current research trends, the book provides a comprehensive guide for researchers, cybersecurity professionals, and IoT developers aiming to understand and counteract botnet threats. Ultimately, Anatomy of IoT Botnet and Detection Methods serves as a crucial resource for strengthening the cybersecurity posture of IoT ecosystems through informed detection and mitigation practices. Bottom of FormThe content of the book categorized in the following sub-sections: Introduction to IoT and Botnets: An overview of IoT technology, its adoption, and the rising threat of botnets. IoT Device Vulnerabilities: Analysis of common security weaknesses in IoT devices that cybercriminals exploit. Botnet Architecture: Detailed examination of how IoT botnets are structured, including command-and-control mechanisms. Infection and Propagation: Methods used by attackers to spread malware across IoT networks. Detection Techniques: Overview of current detection methods, including anomaly detection, signature-based approaches, and machine learning. Mitigation Strategies: Practical advice on how to secure IoT devices, including best practices for manufacturers and users. Case Studies: Real-world examples of IoT botnet attacks and their impact. The book concludes with a discussion on the future of IoT security, emphasizing the need for continuous innovation in detection and prevention methods.

The book Anatomy of IoT Botnets and Detection Methods delves into the evolving landscape of cybersecurity threats associated with the Internet of Things (IoT), specifically focusing on the anatomy, behavior, and detection of IoT-based botnets. As IoT devices proliferate in both consumer and industrial settings, their inherent vulnerabilities—such as weak authentication, limited processing power, and lack of regular updates—make them prime targets for attackers. The book begins by exploring how IoT botnets are formed, highlighting key attack vectors such as malware propagation, command, and control (C&C) mechanisms, and commonly exploited protocols like Telnet and UPnP. Notable case studies, including the Mirai and Mozi botnets, illustrate real-world impacts, emphasizing the scale and damage these threats can inflict. The core of the book then transitions into detection methodologies, covering both traditional and AI-driven approaches. Techniques such as signature-based detection, anomaly detection using machine learning, network traffic analysis, and honeypot deployment are thoroughly examined. The authors also address the challenges in detecting IoT botnets, including encrypted traffic, device heterogeneity, and low visibility in resource-constrained devices. Furthermore, the book emphasizes the importance of proactive defense strategies, such as firmware hardening, secure boot mechanisms, and real-time behavioral analytics. It underscores the role of collaborative intelligence sharing among stakeholders to enhance detection capabilities. By integrating theoretical concepts with practical insights and current research trends, the book provides a comprehensive guide for researchers, cybersecurity professionals, and IoT developers aiming to understand and counteract botnet threats. Ultimately, Anatomy of IoT Botnet and Detection Methods serves as a crucial resource for strengthening the cybersecurity posture of IoT ecosystems through informed detection and mitigation practices. Bottom of FormThe content of the book categorized in the following sub-sections: Introduction to IoT and Botnets: An overview of IoT technology, its adoption, and the rising threat of botnets. IoT Device Vulnerabilities: Analysis of common security weaknesses in IoT devices that cybercriminals exploit. Botnet Architecture: Detailed examination of how IoT botnets are structured, including command-and-control mechanisms. Infection and Propagation: Methods used by attackers to spread malware across IoT networks. Detection Techniques: Overview of current detection methods, including anomaly detection, signature-based approaches, and machine learning. Mitigation Strategies: Practical advice on how to secure IoT devices, including best practices for manufacturers and users. Case Studies: Real-world examples of IoT botnet attacks and their impact. The book concludes with a discussion on the future of IoT security, emphasizing the need for continuous innovation in detection and prevention methods.

This book provides basic knowledge of the programming and interfacing of devices with IoT modem and programming. The aim is to explain the basic steps to understand the IoT and its application in agriculture field. It will serve be a reference book for postgraduate and undergraduate Engineering students. Students from Electronics, Electrical, Mechatronics, Robotics, Mechanical, Computer science can use the book for their projects and research. This book is based entirely on the practical experience of the authors while undergoing projects with the students and industries. This book is co-published with NIPA. Taylor and Francis does not sell or distribute its print and electronic editions in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka.

Getting Started for Internet of Things with Launch Pad and ESP8266 provides a platform to get started with the Ti launch pad and IoT modules for Internet of Things applications. The book provides the basic knowledge of Ti launch Pad and ESP8266 based customized modules with their interfacing, along with the programming. The book discusses the application of Internet of Things in different areas. Several examples for rapid prototyping are included, this to make the readers understand the concept of IoT. The book comprises of twenty-seven chapters, which are divided into four sections and which focus on the design of various independent prototypes. Section-A gives a brief introduction to Ti launch pad (MSP430) and Internet of Things platforms like GPRS, NodeMCU and NuttyFi (ESP8266 customized board), and it shows steps to program these boards. Examples on how to interface these boards with display units, analog sensors, digital sensors and actuators are also included, this to make reader comfortable with the platforms. Section-B discusses the communication modes to relay the data like serial out, PWM and I2C. Section-C explores the IoT data loggers and shows certain steps to design and interact with the servers. Section-D includes few IoT based case studies in various fields. This book is based on the practical experience of the authors while undergoing projects with students and partners from various industries.

The aim of this book is to provide a platform to readers through which they can access the applications of 'Internet of Things' in the Automotive field. Internet of Things in Automotive Industries and Road Safety provides the basic knowledge of the modules with interfacing, along with the programming. Several examples for rapid prototyping are included, this to make the readers understand about the concept of IoT. The book comprises of ten chapters for designing different independent prototypes for the automotive applications, and it would be beneficial for the people who want to get started with hardware based project prototypes. The text is based on the practical experience of the authors built up whilst undergoing projects with students and industry. Technical topics discussed in the book include:Role of IoT in automotive industriesArduino and its interfacing with I/O devicesTi Launch Pad and its interfacing with I/O devicesNodeMCU and its interfacing with I/O devicesSerial Communication with Arduino and NodeMCU

Internet of Things with 8051 and ESP8266 provides a platform to get started with the Internet of Things (IoT) with 8051. This book describes programming basics and how devices interface within designed systems. It presents a unique combination of 8051 with ESP8266 and I/O devices for IoT applications supported by case studies to provide the solutions to real-time problems. The programs and circuits have been tested on real hardware and explore different areas in IoT applications. Divided into four sections, it explains the customized boards for IoT applications followed by the means by which 8051 and ESP8266 interface with I/O devices. It spans levels from basic to advanced interfacing with special devices, server design, and data logging with different platforms. Features: Covers how I/O devices interface with 8051 and ESP8266 Explains the basic concepts of interfacing complexity using applications with examples Provides hands-on practice exercises with 8051 and ESP8266 for IoT applications Discusses both case studies and programming tests on real hardware during industrial and student projects Reviews the integration of smart devices with IoTInternet of Things with 8051 and ESP8266 is intended for senior undergraduate and graduate students in electrical and electronics engineering, but anyone with an interest in the professional curriculum of electrical and electronics engineering will find this book a welcome addition to their collection.

This book provides basic knowledge of the programming and interfacing of devices with IoT modem and programming. The aim is to explain the basic steps to understand the IoT and its application in agriculture field. It will serve be a reference book for postgraduate and undergraduate Engineering students. Students from Electronics, Electrical, Mechatronics, Robotics, Mechanical, Computer science can use the book for their projects and research. This book is based entirely on the practical experience of the authors while undergoing projects with the students and industries. This book is co-published with NIPA. Taylor and Francis does not sell or distribute its print and electronic editions in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka.

This book is a platform for anyone who wishes to explore Artificial Intelligence in the field of agriculture from scratch or broaden their understanding and its uses. This book offers a practical, hands-on exploration of Artificial Intelligence, machine learning, deep Learning, computer vision and Expert system with proper examples to understand. This book also covers the basics of python with example so that any anyone can easily understand and utilize artificial intelligence in agriculture field. This book is divided into two parts wherein first part talks about the artificial intelligence and its impact in the agriculture with all its branches and their basics. The second part of the book is purely implementation of algorithms and use of different libraries of machine learning, deep learning and computer vision to build useful and sightful projects in real time which can be very useful for you to have better understanding of artificial intelligence. After reading this book, the reader will an understanding of what Artificial Intelligence is, where it is applicable, and what are its different branches, which can be useful in different scenarios. The reader will be familiar with the standard workflow for approaching and solving machine-learning problems, and how to address commonly encountered issues. The reader will be able to use Artificial Intelligence to tackle real-world problems ranging from crop health prediction to field surveillance analytics, classification to recognition of species of plants etc. Note: T&F does not sell or distribute the hardback in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka. This title is co-published with NIPA.

This book provides a platform to understand Internet of things with Raspberry Pi and the basic knowledge of the programming and interfacing of the devices and designed systems. It broadly covers introduction to Internet of Things and enabling technologies, interfacing with Raspberry Pi and Arduino and interfacing with Raspberry Pi GPIO. Internet of Things with Raspberry pi and Arduino is aimed at senior undergraduate, graduate students and professionals in electrical engineering, computer engineering including robotics.

This book is intended to serve as a resource for those who wish to delve into the realm of robotics in agriculture and expand their knowledge of its applications. The book provides an expert system that is supported by illustrative examples, which are designed to facilitate comprehension. Additionally, the book covers the fundamentals of robotics, ensuring that readers have a solid grasp of the underlying concepts. The book has been structured into fifteen chapters, each of which examines the areas where robotics can significantly improve agricultural efficiency and productivity. Upon completion of this book, readers will have a comprehensive understanding of what robotics entails, the various scenarios in which it can be applied, and its diverse branches.

Internet of Things with 8051 and ESP8266 provides a platform to get started with the Internet of Things (IoT) with 8051. This book describes programming basics and how devices interface within designed systems. It presents a unique combination of 8051 with ESP8266 and I/O devices for IoT applications supported by case studies to provide the solutions to real-time problems. The programs and circuits have been tested on real hardware and explore different areas in IoT applications. Divided into four sections, it explains the customized boards for IoT applications followed by the means by which 8051 and ESP8266 interface with I/O devices. It spans levels from basic to advanced interfacing with special devices, server design, and data logging with different platforms. Features: Covers how I/O devices interface with 8051 and ESP8266 Explains the basic concepts of interfacing complexity using applications with examples Provides hands-on practice exercises with 8051 and ESP8266 for IoT applications Discusses both case studies and programming tests on real hardware during industrial and student projects Reviews the integration of smart devices with IoTInternet of Things with 8051 and ESP8266 is intended for senior undergraduate and graduate students in electrical and electronics engineering, but anyone with an interest in the professional curriculum of electrical and electronics engineering will find this book a welcome addition to their collection.

Explore and work with tools for Biomedical Data Acquisition and Signal Processing Key FeaturesGet familiar with the working of Biomedical Sensor Learn how to program Arduino with LabVIEW with ease Get familiar with the process of interfacing of analog sensors with Arduino Mega Use LabVIEW to build an ECG Patient Monitoring System Learn how to interface a simple GSM Module to Arduino Description Biomedical sensor data acquisition with LabVIEW provides a platform for engineering students to get acquainted with Arduino and LabVIEW programming. Arduino based projects would help to improve the standards of patient care and monitoring in hospitals and the standard of living in cities by implementing a variety of innovative ideas more directly. The goal of this book is to explore and illustrate the programming and interfacing of Arduino with biomedical sensors, communication modules, and LabVIEW GUI. The book begins with essential knowledge and gradually progresses towards the advanced level of comprehension. It starts with a Biomedical sensor-based project with a working model of LabVIEW GUI. It also gives a detailed overview of programming with Arduino IDE and LabVIEW. It covers Interface for Arduino (LIFA), which is a unique contribution that aids in the understanding of embedded systems. This book for high-level students who need application-based knowledge for developing some real-time patient monitoring systems using Arduino and LabVIEW. What will you learn Learn about the interfacing of Biomedical SensorsUnderstand how to create GUI with LabVIEWLearn about digital and analog sensor interfacing with Arduino Learn how to load the LabVIEW Interface for Arduino without FirmwareLearn how to Interface LabVIEW with Arduino Board using FirmwareWho this book is for This book is for Students/Professionals looking for a career in the growing field of Biomedical Sensors. This book is also for those who want to get familiar with the basics of E-Healthcare systems. Table of Contents 1. Introduction to Biomedical Signals 2. Introduction to Arduino Mega 3. Digital sensor interfacing with Arduino Mega4. Display device interfacing with Arduino Mega5. Analog sensor interfacing with Arduino Mega6. Introduction to interfacing Arduino and LabVIEW without Firmware7. GSR sensor module interfacing using Arduino 8. Blood Pressure Sensor Module 9. Respiratory (nasal airflow) sensor module 10. Temperature Sensor Module 11. Body Position Sensor Module12. Introduction to interfacing Arduino and LabVIEWFirmware13. ECG Sensor Module with Arduino14. EMG Sensor Module with Arduino15. Pulse Oximeter interface with Arduino About the Authors Anshuman Prakash has completed his M. Tech in Embedded systems specialization in wearable technology from University of Petroleum and Energy Studies, Dehradun, India. Dr. Lovi Raj Gupta is the Executive Dean, Faculty of Technology & Sciences, Lovely Professional University. He is a leading light in the field of Technical and Higher education in the country. Dr. Rajesh Singh is currently associated with Lovely Professional University as Professor with more than Sixteen years of experience in academics. Dr. Anita Gehlot is currently associated with Lovely Professional University as Associate Professor with more than twelve years of experience in academics. Rydhm Beri is working as an Assistant Professor in BBK DAV College for Women, Amritsar, since last three years and has 5 years of experience in the field of education.

Arduino is an open-source electronics platform based on easy-to-use hardware and software while LabVIEW is a graphical programming telling how to connect functions and work with a variety of datatypes when constructing applications. This book will help beginners to get started with Arduino-based embedded systems including essential know-how of the programming and interfacing of the devices. Book includes programming and simulation of Arduino-based projects and interfacing with LabVIEW, based on practical case studies. The book comprises of total twenty five chapters with description, working model of LabVIEW and programming with Arduino IDE.

This book is a comprehensive resource for individuals who wish to explore the potential of Artificial Intelligence (AI) in agriculture, either for the purpose of gaining a foundational understanding or expanding their existing knowledge. The book provides readers with a practical, hands-on approach to learning about AI, machine learning, deep learning, computer vision, and expert systems, with real-world examples to aid comprehension. Furthermore, the book includes an introduction to the basics of Python programming, making it accessible to readers with little or no prior programming experience. The book is divided into two parts: the first part covers the fundamentals of AI in agriculture, including its various branches and their applications. The second part focuses on the implementation of algorithms and the use of different machine learning, deep learning, and computer vision libraries to develop practical and insightful projects. Upon completion of this book, readers will have gained an understanding of the various branches of AI and their applicable scenarios, as well as the standard workflow for approaching and solving machine-learning problems. Additionally, readers will be equipped with the skills necessary to tackle real-world problems in the agriculture sector, such as crop health prediction, field surveillance analytics, and the recognition of plant species. With this knowledge, readers will be well-prepared to leverage the power of AI in the agriculture field.

This book provides a platform to understand Internet of things with Raspberry Pi and the basic knowledge of the programming and interfacing of the devices and designed systems. It broadly covers introduction to Internet of Things and enabling technologies, interfacing with Raspberry Pi and Arduino and interfacing with Raspberry Pi GPIO. Internet of Things with Raspberry pi and Arduino is aimed at senior undergraduate, graduate students and professionals in electrical engineering, computer engineering including robotics.

Arduino and Scilab based Projects provides information ranging from the basics to advanced knowledge of Arduino and its interfacing with input/output devices (display devices, actuators, sensors), communication modules (RF modem, Zigbee) and Scilab. It also provides embedded system based on Arduino with simulation, programming and interfacing with Scilab, Arduino interfacing with Scilab with and without Arduino 1.1 packages. Chapters are arranged in an easy-to-understand sequence that enhances the learning experience for readers. Descriptions of real time project prototypes with programming and simulation of Arduino and Scilab.

Getting Started for Internet of Things with Launch Pad and ESP8266 provides a platform to get started with the Ti launch pad and IoT modules for Internet of Things applications. The book provides the basic knowledge of Ti launch Pad and ESP8266 based customized modules with their interfacing, along with the programming. The book discusses the application of Internet of Things in different areas. Several examples for rapid prototyping are included, this to make the readers understand the concept of IoT. The book comprises of twenty-seven chapters, which are divided into four sections and which focus on the design of various independent prototypes. Section-A gives a brief introduction to Ti launch pad (MSP430) and Internet of Things platforms like GPRS, NodeMCU and NuttyFi (ESP8266 customized board), and it shows steps to program these boards. Examples on how to interface these boards with display units, analog sensors, digital sensors and actuators are also included, this to make reader comfortable with the platforms. Section-B discusses the communication modes to relay the data like serial out, PWM and I2C. Section-C explores the IoT data loggers and shows certain steps to design and interact with the servers. Section-D includes few IoT based case studies in various fields. This book is based on the practical experience of the authors while undergoing projects with students and partners from various industries.

The primary aim of this book is to offer a platform for automating agricultural fields using various sensors and transmitting the data to the cloud through the Internet of Things (IoT). This book provides a comprehensive introduction to programming and interfacing devices with IoT modems and offers a step-by-step guide to understanding the fundamental concepts of IoT and its application in the agricultural sector. It serves as a valuable reference for postgraduate and undergraduate engineering students, particularly those pursuing studies in Electronics, Electrical, Mechatronics, Robotics, Mechanical, and Computer Science. The unique selling point of this book is the inclusion of programming-based real-time project prototypes, which are based on the practical experience of the authors while working on projects with students and industries.

The primary intention of composing this book is to offer a basis for automating agricultural fields using various sensors and transmitting the data to the cloud through the internet of things. This book supplies the fundamental knowledge required for programming and connecting devices to an IoT modem, as well as the essential steps for comprehending IoT and its application in the agricultural field. It serves as a useful resource for postgraduate and undergraduate engineering students, particularly those studying Electronics, Electrical, Mechatronics, Robotics, Mechanical, and Computer Science. The distinctive feature of this book is that it provides programming-based real-time project prototypes, which are based on the practical experiences of the authors while working on projects with students and industries.