Dogan Ibrahim

Most microcontroller-based applications nowadays are large, complex, and may require several tasks to share the MCU in multitasking applications. Most modern high-speed microcontrollers support multitasking kernels with sophisticated scheduling algorithms so that many complex tasks can be executed on a priority basis. ARM-based Microcontroller Multitasking Projects: Using the FreeRTOS Multitasking Kernel explains how to multitask ARM Cortex microcontrollers using the FreeRTOS multitasking kernel. The book describes in detail the features of multitasking operating systems such as scheduling, priorities, mailboxes, event flags, semaphores etc. before going onto present the highly popular FreeRTOS multitasking kernel. Practical working real-time projects using the highly popular Clicker 2 for STM32 development board (which can easily be transferred to other boards) together with FreeRTOS are an essential feature of this book. Projects include: LEDs flashing at different rates; Refreshing of 7-segment LEDs; Mobile robot where different sensors are controlled by different tasks; Multiple servo motors being controlled independently; Multitasking IoT project; Temperature controller with independent keyboard entry; Random number generator with 3 tasks: live, generator, display; home alarm system; car park management system, and many more.

ARM-based Microcontroller Projects Using mbed gives readers a good understanding of the basic architecture and programming of ARM-based microcontrollers using ARM’s mbed software. The book presents the technology through a project-based approach with clearly structured sections that enable readers to use or modify them for their application. Sections include: Project title, Description of the project, Aim of the project, Block diagram of the project, Circuit diagram of the project, Construction of the project, Program listing, and a Suggestions for expansion. This book will be a valuable resource for professional engineers, students and researchers in computer engineering, computer science, automatic control engineering and mechatronics.

PIC32 Microcontrollers and the Digilent chipKIT: Introductory to Advanced Projects will teach you about the architecture of 32-bit processors and the hardware details of the chipKIT development boards, with a focus on the chipKIT MX3 microcontroller development board. Once the basics are covered, the book then moves on to describe the MPLAB and MPIDE packages using the C language for program development. The final part of the book is based on project development, with techniques learned in earlier chapters, using projects as examples. Each projectwill have a practical approach, with in-depth descriptions and program flow-charts with block diagrams, circuit diagrams, a full program listing and a follow up on testing and further development. With this book you will learn: State-of-the-art PIC32 32-bit microcontroller architecture How to program 32-bit PIC microcontrollers using MPIDE, MPLAB, and C language Core features of the chipKIT series development boards How to develop simple projects using the chipKIT MX3 development board and Pmod interface cards how to develop advanced projects using the chipKIT MX3 development boards

Extensively revised and updated to encompass the latest developments in the PIC 18FXXX series, this book demonstrates how to develop a range of microcontroller applications through a project-based approach. After giving an introduction to programming in C using the popular mikroC Pro for PIC and MPLAB XC8 languages, this book describes the project development cycle in full. The book walks you through fully tried and tested hands-on projects, including many new, advanced topics such as Ethernet programming, digital signal processing, and RFid technology. This book is ideal for engineers, technicians, hobbyists and students who have knowledge of the basic principles of PIC microcontrollers and want to develop more advanced applications using the PIC18F series. This book Includes over fifty projects which are divided into three categories: Basic, Intermediate, and Advanced. New projects in this edition: Logic probe Custom LCD font design Hi/Lo game Generating various waveforms in real-time Ultrasonic height measurement Frequency counter Reaction timer GPS projects Closed-loop ON/OFF temperature control Bluetooth projects (master and slave) RFid projects Clock using Real-time-clock (RTC) chip RTC alarm project Graphics LCD (GLCD) projects Barometer+thermometer+altimeter project Plotting temperature on GLCD Ethernet web browser based control Ethernet UDP based control Digital signal processing (Low Pass Filter design) Automotive LIN bus project Automotive CAN bus project Multitasking projects (using both cooperative and Round-robin scheduling) Unipolar stepper motor projects Bipolar stepper motor projects Closed-loop ON/OFF DC motor control

The new generation of 32-bit PIC microcontrollers can be used to solve the increasingly complex embedded system design challenges faced by engineers today. This book teaches the basics of 32-bit C programming, including an introduction to the PIC 32-bit C compiler. It includes a full description of the architecture of 32-bit PICs and their applications, along with coverage of the relevant development and debugging tools. Through a series of fully realized example projects, Dogan Ibrahim demonstrates how engineers can harness the power of this new technology to optimize their embedded designs. With this book you will learn: The advantages of 32-bit PICs The basics of 32-bit PIC programming The detail of the architecture of 32-bit PICs How to interpret the Microchip data sheets and draw out their key points How to use the built-in peripheral interface devices, including SD cards, CAN and USB interfacing How to use 32-bit debugging tools such as the ICD3 in-circuit debugger, mikroCD in-circuit debugger, and Real Ice emulator

Describing the use of displays in microcontroller based projects, the author makes extensive use of real-world, tested projects. The complete details of each project are given, including the full circuit diagram and source code. The author explains how to program microcontrollers (in C language) with LED, LCD and GLCD displays; and gives a brief theory about the operation, advantages and disadvantages of each type of display. Key features: Covers topics such as: displaying text on LCDs, scrolling text on LCDs, displaying graphics on GLCDs, simple GLCD based games, environmental monitoring using GLCDs (e.g. temperature displays)Uses C programming throughout the book – the basic principles of programming using C language and introductory information about PIC microcontroller architecture will also be providedIncludes the highly popular PIC series of microcontrollers using the medium range PIC18 family of microcontrollers in the book. Provides a detailed explanation of Visual GLCD and Visual TFT with examples. Companion website hosting program listings and data sheetsContains the extensive use of visual aids for designing LED, LCD and GLCD displays to help readers to understand the details of programming the displays: screen-shots, tables, illustrations, and figures, as well as end of chapter exercises Using LEDs, LCDS, and GLCDs in Microcontroller Projects is an application oriented book providing a number of design projects making it practical and accessible for electrical & electronic engineering and computer engineering senior undergraduates and postgraduates. Practising engineers designing microcontroller based devices with LED, LCD or GLCD displays will also find the book of great use.

PIC Microcontrollers are a favorite in industry and with hobbyists. These microcontrollers are versatile, simple, and low cost making them perfect for many different applications. The 8-bit PIC is widely used in consumer electronic goods, office automation, and personal projects. Author, Dogan Ibrahim, author of several PIC books has now written a book using the PIC18 family of microcontrollers to create projects with SD cards. This book is ideal for those practicing engineers, advanced students, and PIC enthusiasts that want to incorporate SD Cards into their devices. SD cards are cheap, fast, and small, used in many MP3 players, digital and video cameras, and perfect for microcontroller applications. Complete with Microchip's C18 student compiler and using the C language this book brings the reader up to speed on the PIC 18 and SD cards, knowledge which can then be harnessed for hands-on work with the eighteen projects included within. Two great technologies are brought together in this one practical, real-world, hands-on cookbook perfect for a wide range of PIC fans.