Lihua Xie

Control over Communication Networks Advanced and systematic examination of the design and analysis of networked control systems and multi-agent systems Control Over Communication Networks provides a systematic and nearly self-contained description of the analysis and design of networked control systems (NCSs) and multi-agent systems (MASs) over imperfect communication networks, with a primary focus on fading channels and delayed channels. The text characterizes the effect of communication channels on the stability and performance of NCSs, and further studies the joint impact of communication channels and network topology on the consensus of MASs. By integrating communication and control theory, the four highly-qualified authors present fundamental results concerning the stabilization of NCSs over power-constrained fading channels and Gaussian finite-state Markov channels, linear-quadratic optimal control of NCSs with random input gains, optimal state estimation with intermittent observations, consensus of MASs with communication delay and packet dropouts, and synchronization of delayed Vicsek models. Simulation results are given in each chapter to demonstrate the developed analysis and synthesis approaches. The references are comprehensive and up-to-date, enabling further study for readers. Topics covered in Control Over Communication Networks include: Basic foundational knowledge, including control theory, communication theory, and graph theory, to enable readers to understand more complex topicsThe stabilization, optimal control, and remote state estimation problems of linear systems over channels with fading, signal-to-noise constraints, or intermittent measurementsConsensus problems of MASs over fading/delayed channels, with directed and undirected communication graphs Control Over Communication Networks provides a valuable unified platform for understanding the analysis and design of NCSs and MASs for researchers, control engineers working on control systems over communication networks, and mechanical engineers working on unmanned systems. Preliminary knowledge of linear system theory and matrix analysis is required.

This book is intended for researchers active in the field of (blind) system identification and aims to provide new identification ideas/insights for dealing with challenging system identification problems. It presents a comprehensive overview of the state-of-the-art in the area, which would save a lot of time and avoid collecting the scattered information from research papers, reports and unpublished work. Besides, it is a self-contained book by including essential algebraic, system and optimization theories, which can help graduate students enter the amazing blind system identification world with less effort.

This book is intended for researchers active in the field of (blind) system identification and aims to provide new identification ideas/insights for dealing with challenging system identification problems. It presents a comprehensive overview of the state-of-the-art in the area, which would save a lot of time and avoid collecting the scattered information from research papers, reports and unpublished work. Besides, it is a self-contained book by including essential algebraic, system and optimization theories, which can help graduate students enter the amazing blind system identification world with less effort.

Discrete-Time and Discrete-Space Dynamical Systems provides a systematic characterization of the similarities and differences of several types of discrete-time and discrete-space dynamical systems, including:Boolean control networks;nondeterministic finite-transition systems;finite automata;labelled Petri nets; andcellular automata. The book's perspective is primarily based on topological properties though it also employs semitensor-product and graph-theoretic methods where appropriate. It presents a series of fundamental results: invertibility, observability, detectability, reversiblity, etc., with applications to systems biology. Academic researchers with backgrounds in applied mathematics, engineering or computer science and practising engineers working with discrete-time and discrete-space systems will find this book a helpful source of new understanding for this increasingly important class of systems. The basic results to be found within are of fundamental importance for further study of related problems such as automated synthesis and safety control in cyber-physical systems using formal methods.

The H8 control has been one of the important robust control approaches since the 1980s. This book extends the area to nonlinear stochastic H2/H8 control, and studies more complex and practically useful mixed H2/H8 controller synthesis rather than the pure H8 control. Different from the commonly used convex optimization method, this book applies the Nash game approach to give necessary and sufficient conditions for the existence and uniqueness of the mixed H2/H8 control. Researchers will benefit from our detailed exposition of the stochastic mixed H2/H8 control theory, while practitioners can apply our efficient algorithms to address their practical problems.

Discrete-Time and Discrete-Space Dynamical Systems provides a systematic characterization of the similarities and differences of several types of discrete-time and discrete-space dynamical systems, including:Boolean control networks;nondeterministic finite-transition systems;finite automata;labelled Petri nets; andcellular automata. The book's perspective is primarily based on topological properties though it also employs semitensor-product and graph-theoretic methods where appropriate. It presents a series of fundamental results: invertibility, observability, detectability, reversiblity, etc., with applications to systems biology. Academic researchers with backgrounds in applied mathematics, engineering or computer science and practising engineers working with discrete-time and discrete-space systems will find this book a helpful source of new understanding for this increasingly important class of systems. The basic results to be found within are of fundamental importance for further study of related problems such as automated synthesis and safety control in cyber-physical systems using formal methods.

The H8 control has been one of the important robust control approaches since the 1980s. This book extends the area to nonlinear stochastic H2/H8 control, and studies more complex and practically useful mixed H2/H8 controller synthesis rather than the pure H8 control. Different from the commonly used convex optimization method, this book applies the Nash game approach to give necessary and sufficient conditions for the existence and uniqueness of the mixed H2/H8 control. Researchers will benefit from our detailed exposition of the stochastic mixed H2/H8 control theory, while practitioners can apply our efficient algorithms to address their practical problems.

This monograph focuses on characterizing the stability and performance consequences of inserting limited-capacity communication networks within a control loop. The text shows how integration of the ideas of control and estimation with those of communication and information theory can be used to provide important insights concerning several fundamental problems such as:· minimum data rate for stabilization of linear systems over noisy channels;· minimum network requirement for stabilization of linear systems over fading channels; and· stability of Kalman filtering with intermittent observations. A fundamental link is revealed between the topological entropy of linear dynamical systems and the capacities of communication channels. The design of a logarithmic quantizer for the stabilization of linear systems under various network environments is also extensively discussed and solutions to many problems of Kalman filtering with intermittent observations are demonstrated. Analysis and Design of Networked Control Systems will interest control theorists and engineers working with networked systems and may also be used as a resource for graduate students with backgrounds in applied mathematics, communications or control who are studying such systems.

This monograph focuses on characterizing the stability and performance consequences of inserting limited-capacity communication networks within a control loop. The text shows how integration of the ideas of control and estimation with those of communication and information theory can be used to provide important insights concerning several fundamental problems such as:· minimum data rate for stabilization of linear systems over noisy channels;· minimum network requirement for stabilization of linear systems over fading channels; and· stability of Kalman filtering with intermittent observations. A fundamental link is revealed between the topological entropy of linear dynamical systems and the capacities of communication channels. The design of a logarithmic quantizer for the stabilization of linear systems under various network environments is also extensively discussed and solutions to many problems of Kalman filtering with intermittent observations are demonstrated. Analysis and Design of Networked Control Systems will interest control theorists and engineers working with networked systems and may also be used as a resource for graduate students with backgrounds in applied mathematics, communications or control who are studying such systems.

Reset control is concerned with how to reset a system when it is disturbed to overcome the inherent limitations of linear feedback control and to improve robustness. It has found applications in many practical systems including flexible mechanical systems, tapespeed control systems and high precision positioning systems. This book provides an introduction to the theory of reset control, and draws on the authors' own research and others' to explore the application of reset control in a variety of settings, with an emphasis on hard disk drive servo systems. Topics covered include the motivation and basic concepts of reset control systems; derivation of the describing function of reset systems; how the reset matrix affects the frequency domain property of a system; recent developments on stability analysis of reset control systems; robust stability of reset control systems with uncertainties; reset control systems with discrete-time reset conditions; optimal reset control design under fixed reset time instants; and reset control systems with conic jump sets. This book is essential reading for researchers, postgraduates and advanced students in control theory, and for research-based engineers who are interested in the theory of hybrid control systems and their engineering applications.

From the ox carts and pottery wheels the spacecrafts and disk drives, efficiency and quality has always been dependent on the engineer’s ability to anticipate and control the effects of vibration. And while progress in negating the noise, wear, and inefficiency caused by vibration has been made, more is needed. Modeling and Control of Vibration in Mechanical Systems answers the essential needs of practitioners in systems and control with the most comprehensive resource available on the subject. Written as a reference for those working in high precision systems, this uniquely accessible volume: Differentiates between kinds of vibration and their various characteristics and effectsOffers a close-up look at mechanical actuation systems that are achieving remarkably high precision positioning performanceIncludes techniques for rejecting vibrations of different frequency ranges Covers the theoretical developments and principles of control design with detail elaborate enough that readers will be able to apply the techniques with the help of MATLAB® Details a wealth of practical working examples as well as a number of simulation and experimental results with comprehensive evaluations The modern world’s ever-growing spectra of sophisticated engineering systems such as hard disk drives, aeronautic systems, and manufacturing systems have little tolerance for unanticipated vibration of even the slightest magnitude. Accordingly, vibration control continues to draw intensive focus from top control engineers and modelers. This resource demonstrates the remarkable results of that focus to date, and most importantly gives today’s researchers the technology that they need to build upon into the future. Chunling Du is currently researching modeling and advanced servo control of hard disk drives at the Data Storage Institute in Singapore. Lihua Xie is the Director of the Centre for Intelligent Machines and a professor at Nanyang Technological University in Singapore.

More than a decade ago, world-renowned control systems authority Frank L. Lewis introduced what would become a standard textbook on estimation, under the title Optimal Estimation, used in top universities throughout the world. The time has come for a new edition of this classic text, and Lewis enlisted the aid of two accomplished experts to bring the book completely up to date with the estimation methods driving today's high-performance systems. A Classic Revisited Optimal and Robust Estimation: With an Introduction to Stochastic Control Theory, Second Edition reflects new developments in estimation theory and design techniques. As the title suggests, the major feature of this edition is the inclusion of robust methods. Three new chapters cover the robust Kalman filter, H-infinity filtering, and H-infinity filtering of discrete-time systems. Modern Tools for Tomorrow's Engineers This text overflows with examples that highlight practical applications of the theory and concepts. Design algorithms appear conveniently in tables, allowing students quick reference, easy implementation into software, and intuitive comparisons for selecting the best algorithm for a given application. In addition, downloadable MATLAB® code allows students to gain hands-on experience with industry-standard software tools for a wide variety of applications. This cutting-edge and highly interactive text makes teaching, and learning, estimation methods easier and more modern than ever.

Time delay systems exist in many engineering ?elds such as transportation, communication, process engineering and more recently networked control s- tems. In recent years,time delaysystems haveattracted recurring interests from research community. Much of the research work has been focused on stability analysis and stabilization of time delay systems using the so-called Lyapunov- Krasovskii functionals and linear matrix inequality (LMI) approach. While the LMI approach does provide an e?cient tool for handling systems with delays in state and/or inputs, the LMI based results are mostly only su?cient and only numerical solutions are available. For systems with knownsingle input delay, there have been rather elegant- alytical solutions to various problems such as optimal tracking, linear quadratic regulation and H control. We note that discrete-time systems with delays can ? usually be converted into delay free systems via system augmentation, however, theaugmentationapproachleadsto muchhigher computationalcosts,especially for systems of higher state dimension and large delays. For continuous-time s- tems,time delayproblemscaninprinciple betreatedby thein?nite-dimensional system theory which, however,leads to solutions in terms of Riccati type partial di? erential equations or operator Riccati equations which are di?cult to und- stand and compute. Some attempts have been made in recent years to derive explicit and e?cient solutions for systems with input/output (i/o) delays. These include the study ontheH controlofsystemswith multiple input delaysbased ? on the stable eigenspace of a Hamlitonian matrix [46].

Over the past decades a considerable interest has been concentrated on problems involving signals and systems that depend on more than one variable. 2-D signals and systems have been studied in relation to several modern engineering fields such as process control, multidimensional digital filtering, image enhancement, image deblurring, signal processing etc. Among the major results developed so far, 2-D digital filters are investigated as a description in frequency domain or as a convolution of the input and the unit response, which has a great potential for practical applications in 2-D image and signal processing. This monograph aims to address several problems of control and filtering of 2-D discrete systems. Specifically the problems of Hinfinity filtering, Hinfinity control, stabilization, Hinfinity model reduction as well as Hinfinity deconvolution filtering of 2-D linear discrete systems are treated.